X-550 'X' Gun
C-Gun
Single Sided Gun
|
THE BENEFITS OF HIGH FREQUENCY |
|
- Save 40% on your electricity bill !
The unequaled efficiency of our patented transformer need 40% less current than a conventional transformer, for the same output current.
- Drastic reduction of weight
11kg (24 lbs) transformer versus 75kg (161 lbs) for a conventional transformer.
- Better current control to improve the quality of welds.
- Very High functioning rate even with air cooling.
|
| POWERFUL & EFFECTIVE |
|
- Multifunctional spot welder : Pneumatic C-gun or X-gun for double sided welding, Single sided gun, Dent pulling using standard accessories
- High squeezing forces - 266kg for the X-550 Gun, 300kg for the C-Gun.
- High welding current with fine adjustment, ideal for high current welding as well as low current use (dent pulling).
- Compressed air cooling system for all cable, arms and transformer.
- Cooling system set off automatically at 40°C with independent cut off point at 80°C for each tool.
|
| USER-FRIENDLY CONSTRUCTION |
|
- Hand-operated pneumatic pliers with extra aperture for difficult to reach areas
- Pivoting head allowing the integration of shorter cables and thereby minimizing electrical losses.
|
| LEADING-EDGE TECHNOLOGY |
|
- Current sensing device with modification of welding time to compensate for current fluctuations.
- Pulsating currents, pre-pulse to produce spatter and spark-free welding of galvanized and coated steels, post-pulse to avoid steal hardening.
- 10 pre-recorded programs to suit various type of welding.
- Digital display of precise welding time.
- Digital control for weld squeeze time.
- Automatic self diagnostic and recognition of 10 different breakdown flags.
|
| TECHNICAL DATA |
Maximum Welding Current
in standard configuration |
16,000A RMS with standard cables |
| Supply |
three phase 400V/50Hz or 220V/60Hz , single phased compatible optional |
| Required safety fuse |
delayed 32A (400V) or 60A (220V) |
| Output Voltage |
15.3 V in open circuit - 14V at max load |
| Input Power |
420 kVA |
| Welding capacity |
Double sided gun : 24mm, One sided gun : 14mm |
| Cable length |
2.50 m (7.5') standard, up to 4m (12') optional |
| Cable section |
150mm² standard, 200mm² optional |
| Welding control |
Current regulation 0.5% |
| Cooling |
Automatic cooling by compressed air standard, optional water cooling |
| Power Control |
IGBT bridge with 6.5kHz phase shift control inverter (13kHz rectified) |
| Weight (without cables and guns) |
46kg (101lbs) |
| Supply dimensions (HxWxL) |
350mm x 540mm x 740mm |
|
